Home > Products > MX-331 / 331T
 
Remote Control Demo-Alert - MX-331 / 331T

Basic Specification
Operating Voltage 5V DC
Horn Alarm Output ≤105 db at 1 ft
Stand-by Current Consumption ≤3.70mA
Output Current 1.0~2.0A
Quiescent Current Consumption ≤3.40mA
Activation Current Consumption ≤220mA
Battery Lithium-ion battery

Introduction
    Nowadays, the Tablet, Smart-Phone has become a favorite target of thieves, once is stolen, it means that you are lose the hardware. If you are concerned to protect your expensive hardware, you should try to take precautions. Better advanced method is use alarm system with detecting sensors. That’s why iMex provide additional safety equipment to provide more comprehensive protection. To ensure that the show-piece not stealing becomes an important issue, iMex MX-331 (or MX-331T) can fulfill customer needs.
    YouTube Video Link: www.youtube.com/watch?v=f3bAOO1zVa4

Package Included
  1. MX-331 Host.
  2. Infra-Red Remote Controller (1 for 5 units).
  3. Universal Adaptor (input 90~240 Vac, output 5Vdc 1.0A). MX-331T adaptor 2.0A.
  4. MX-37TWM: Twin Output (Water-Drop + Micro USB) Detecting Cable.
  5. Cable Holder.
  6. User Guide.

Features
  1. Quick Reaction speed, pull or cut the USB cable, the Alarm warning.
  2. Once the alarm has been triggered, restitution cannot disarm, the alarm must be reset by host key to disarm the alarm (press remote controller “OFF” key to relief).
  3. Built-in alarm horn, high-volume alarm speaker is hidden inside the chassis of the host; it can avoid destruction of the thief, such as the possibility of failure to cut the external alarm horn line, greatly improving security.
  4. With Remote function, easy to use.
  5. LED indicators indicate each port current status.
  6. Wide range Application: Digital Store, Electronics stores or exhibition in Notebook,Tablet Note, Smart phone and other exhibits anti-theft and reusable.

Specification
  1. Adaptor Input Voltage: Universal 90~240Vac. Output 5.0Vdc 1.0A. (MX-331T 2.0A).
  2. Standby Current: ≦ 3.7mA.
  3. Activation Power Consumption: ≦220mA.
  4. Alarm Output: ≧105db.
  5. Induction method: Contact separation alarm or break alarm, USB jack separation alarm, charge Tamper alarm.
  6. Charge function while active display Tablet Note or Smartphone (Adaptor plug-in AC Socket).

How to Set Up MX-332
  1. Testing Method MX-331.
  2. Plug MX-37MC Detecting Cable between MX-331 (USB port) and Tablet Note or Smartphone (Micro USB post), and Water-Drop Detector on Device back-side.
  3. Cable Holder sticks on Rear side Tablet Note (or Smartphone).
  4. Adaptor Cable plug into MX-331 Micro USB Port (DC input).
  5. Plug Adaptor into AC power socket.
  6. Press MX-331 Host Detector & Turn Power ON/OFF Slide Switch (bottom side) to “ON” position.
  7. Press remote controller “ON”, the MX-331 in Active position.
  8. Check MX-331:
    • A) Smartphone (or Tablet Note) starting charge.
    • B) Please Release MX-331 Host Detector, Alarm starts warning. Please press “OFF” to release alarm.
    • C) Separate detecting cable (Micro USB to Smartphone), Alarm warning.
    • D) Separate detecting cable (Water-Drop Detector on Smartphone), Alarm warning.
    • E) The MX-331 passes testing.
  9. Set up MX-331.
  10. Tear off 3M sticker on bottom side.
  11. Stick on display booth (make sure display desk are smooth and solid; without dust, water or organic solvent), give little push to sticker stick as well.
  12. Repeat above operating steps.

Optional Accessories
  1. Display Stand: MX-37TAD-S, MX-37TAD-s, MX-37PAD-s.
  2. Detecting Cable: MX-37U, MX-37M, MX-37TWM, MX-37TSM, MX-37TRM, MX-37TEM, MX-37TWx, MX-37R, MX-37W….


Anti Operation
    When the MX-331 anti-theft device out of line, Cable Separate or water-drop detector break off, the MX-331 immediately triggered alarm, the LED flashes rapidly; a port duty officer shall promptly check equipment and note is "steal". Need to disarm the alarm, you can press the button of the remote control (or disarm the alarm host the On / Off power), and that the lifting of the remote alarm horn beeps.

Caution
    The alarm host should be placed in hidden place, and not on other items below, to avoid alarm sound is masked. Daily check and make sure alarm connect as well, we’ll recommend reset once do a self-test, and observe the indicator light is lit.

MX 376TI