Home > Products > MX-382
 
Twin Targets Smart Alarm- MX-382

Basic Specification
Operating Voltage 5.0Vdc
Standby Current ≦7mA
Activation Power Consumption ≦100mA
Total Output Current 5.0Vdc. 2.0A
Alarm Output ≧95db
Induction method Contact separation alarm or break alarm, USB jack separation alarm, charge Tamper alarm.
Multi Targets 2 Targets

Introduction
    Nowadays, the Camera, Heat-set, Smart-Phone, Tablet has become a favorite target of thieves, once Notebook is stolen; it means that you are lose the hardware. If you are concerned to protect your expensive hardware, you should try to take precautions to secure your property.

Who Needs?
    Camera, Heat-set, Smart-Phone, Tablet manufacture and branch office or importer. Shopping Mall, Computer Chain Store, Exhibition Centre, Telecom Company … Antique shop, Gallery, Museum…

Features
  1. Quick Reaction speed, pull or cut the USB cable, the Alarm warning.
  2. With self-test function design, the factory settings to default the port is turned off, the alarm power USB port to connect the device host to detect the port, and take the initiative to close the idle port (idle port will automatically turn off, not man- made blockage), access device port detected automatically in the security state.
  3. Once the alarm has been triggered, restitution ca not disarm, the alarm must be reset by host key to disarm the alarm (press remote control red key 2 seconds to relief). With very higher safety factor, it can protect customer’s property.
  4. Built-in alarm horn, high-volume alarm speaker is hidden inside the chassis of the host, so you can avoid destruction of the thief, such as the possibility of failure to cut the external alarm horn line, greatly improving security. (If necessary, user can add an external speaker on the wall or easy to hear the alarm sound, the external speaker jack plug into the rear side host).
  5. With Remote function, easy to use (can order extra remote controller, if necessary).
  6. LED Indicator displays each port current status.
  7. USB interface, Ring Type, Tag, Micro USB, Type C, Lighting (i-Phone),Twin Output Detecting Cable selectable, and the cable length can be requested.
  8. Wide range Application: Digital store, Electronics stores or exhibition in Cameras, Head-set, Smart phone, Tablet, MP4 and other exhibits anti-theft and reusable.

Package Included
  1. MX-382 Main Units.
  2. Universal Power Adaptor (input 90~264 Vac, output 5Vdc 2.0A).
  3. MX-38 detecting cable (select by user) x 2.
  4. RF Remote Controller.
  5. User Guide.
    6. Optional Accessories (Detecting Cable)
  6. MX-38R (Ring Type) Detecting Cable.
  7. MX-38C (Curved Surface) Detecting Cable.
  8. MX-38A (i-Phone) Detecting Cable.
  9. MX-38TC (Type C) Detecting Cable..
  10. MX-38TCR (Curved Surface + Ring Type) Twin Output Detecting Cable.
  11. MX-38TCM (Curved Surface + Micro USB) Twin Output Detecting Cable..

Function
  1. A disconnecting alarm functions: Contacts separated alarm, disconnect alarm, USB port unplug alarm, Micro USB separated alarm.
  2. Fortification solution and Defense: auto fortification; solution of anti-manually or remote control anti-solution.
  3. Remote control: Wireless remote disarm.
  4. Active Charge: It can charge Smartphone, Table Note active display (Notebook without active charge).
  5. Alarm warning status: Continuously warning 30 seconds while alarm triggered, if the staff not disarm, the warning status turning to one alarm each 3 seconds, until staff disarm ( Other ports anti-theft still in state of alert).

How to Set Up MX-382
  1. Charge MX-382 2 hours before use..
  2. Turn “ON” MX-382 Power Switch.
  3. Plug detecting Cable’s USB connector into USB Port (MX-382).
  4. Plug Micro USB connector into USB Port (MX-382).
  5. Tear off 3M sticker on Detector and stick detector on secure device.
  6. MX-382 in Active position automatically, you'll hear a beep sound (one time) and Blue LED indicator turn “ON”.
  7. Please check LED panel, the LED indicators “ON”, if NOT, please unplug & plug again, and press remote control Red button, until LED indicator “ON”.
  8. Active charge function: The MX-382 provides active charge function, when plug AC power, it can charge automatically (Camera, Heat-set, Smartphone, Tablet, MP3…).

Anti Operation
    When the anti-theft device out of line, head break off or charging adapter is unplugged, the host immediately triggered alarm (30 seconds), while the corresponding port LED flashes rapidly, a port duty officer shall promptly check equipment and note is "steal”.
    Need to disarm the alarm, you can press the button of the remote control (or disarm the alarm host the On / Off power), and that the lifting of the remote alarm horn beeps.

Caution
  1. The alarm host should be placed in hidden place, and not on other items below, to avoid alarm sound is masked.
  2. Daily check and make sure alarm connect as well, we’ll recommend reset once do a self-test, and observe the indicator light is lit.
  3. How to Plug or unplug USB port? Please hold USB port plug or unplug and do not pull USB cable directly.

MX-382 Camera

MX-382 Smartphone

MX-382