Home > Products > MX-39x
 
2.4G Multi Target Wireless Smart Alarm- MX-39x
Basic Specification
Operating Voltage 5.0Vdc
Standby Current ≦5mA
Activation Power Consumption ≦100mA
Output each USB port 5.0Vdc. 2.0A (max)
Alarm Output ≧100db
Induction method Contact separation alarm or break alarm, Dis-connected alarm, Over secure distance alarm.
Multi Targets 3 or 6 Targets

Introduction
    Over a decade iMex anti-theft alarm select by several well-known companies in their experience store to protect their devices safety.
    Wireless charge function become standard, the shop-front will begin to require the display of cable type anti-theft facilities on the stage to be updated as a wireless anti-theft system. In response to this era, iMex developed “2.4G Multi Targets Wire-less Smart Alarm“, it can monitor and protect 3 or 6 devices at once.

Packing Included
    ￭ MX-393H (Host) x 1 / MX-396H (Host) x 1.
    ￭ MX-39T (Tag) x 6 (or 3) optional: MX-39TP / MX-39TR.
    ￭ MX-39R (Remote Controller) x 1.
    ￭ AC to DC Adaptor (Universal input, DC 5.0V/1.0A output) x 2.
    ￭ USB Charge Cable (for Host).
    ￭ USB Charge Cable (for Tag).
    ￭ User manual

Product Overview
    A.MX-393H / MX-396H (Host Alarm) x 1.

    Specification:
    ￭ input Voltage: 5.0Vdc 1.0A Micro USB.
    ￭ Working Current: Standby <50mA, Active <1,000mA.
    ￭ Build-in Rechargeable Battery: Polymer Lithium Battery 3.7Vdc 500mA.
    ￭ Wireless Frequency: 2.4GHz (transceiver data between Host – Tag).
    ￭ RF Frequency: 433 MHz (Remote Controller) Fortification and de-arming.
    ￭ Set-up Distance: 30~50cm (recommend).
    ￭ Alarm Distance: 2.0~3.0 meter (±20%). Adjustable.
    ￭ Alarm Output: ≧100db.
    ￭ Measurement & Weight: 160×115mm×35mm, ~400 gram
    Functions button Introduce:
    ￭ ON/OFF/ LVD Switch: Power “ON”, “OFF” and LVD (Low Power Indicator).
    ￭ Link/Pair: Searching and link to Tag. After link to Tag, press again to pairing.
    ￭ RESET: press 2 sec Reset button to erase data, back to factory state.
    LED Indicator Status:
    ￭ Power ON/OFF: Green LED Indicator ON/OFF.
    ￭ Low Power: Green LED Indicator Flash.
    ￭ Charge: Green and Red LED Indicator ON.
    ￭ Fully Charged: Green LED Indicator ON.

    Working Status LED Indicator:
    ￭ Press link button, host start searching Tag, the Red LED Indicator stays “ON”,after link to Tag, the Red LED Indicator Flash.
    ￭ 6 CH LED Indicator: at working status, the Blue LED Indicator stay “ON ”.
    ￭ When Tag (secure device) out of allowance distance or Tag break by force from secure device, the LED Indicator “Flash”.
    B.MX-39TP / MX-39TR (Tag) x 6 or 3.

    Specification:
    ￭ input Voltage: 5.0Vdc 1.0A Micro USB.
    ￭ Working Current: Standby <2mA, Active <200mA.
    ￭ Built-in Rechargeable Battery: Polymer Lithium Battery 3.7Vdc220mA.
    ￭ Wireless Frequency: 2.4GHz (transceiver data between Host – Tag).
    ￭ Tag by customer select: MX-39TP (Press Type) or MX-39TR (Ring Type).
    ￭ Set-up distance: 50cm from Host (or according customer's actual needs).
    ￭ Alarm Distance: 2.0~3.0meters (±20%) adjustable.
    ￭ Alarm Output: ≧50db.
    ￭ Measurement & Weight: 49×32mm×8.5mm, ~30 gram.
    Functions Introduce:
    ￭ ON/OFF Button: Pinhole design, press with pin to turn “ON” the tag, LED flash and wait for link and pairing. Press again, the power “OFF”.
    ￭ If need turn “OFF” alarm warning by force, press 2 sec through pinhole.
    ￭ Contact Switch: at the Tag bottom, when shop staff sticks Tag on secure device, the circuit at close state, waiting for fortification order. Once press fortification button from remote controller, alarm in active position. If contact switch disconnected, it’ll trigger alarm both Tag and Host unit.
    LED Indicator:
    ￭ When turn the Tag power ON, the Blue LED Indicator flash.
    ￭ Press Link button, Blue LED Indicator from Flash mode to breathing mode.
    ￭ Press pair button, Blue LED Indicator breathing and buzzer “Beep” one time.
    ￭ Low power Indicator: Red LED Indicator breathing.
    ￭ Warning: Red LED Indicator Flash.
    ￭ Charge: Red LED Indicator turn “ON”, fully charged “OFF”.
    C.MX-39R (RF Controller) x 1.

    Functions Introduce:
    ￭ Active: Fortification button.
    ￭ Release: Unarming button.

Operation steps
  1. Open the package and make sure the contents are complete. (video 1)
  2. Make sure the Smart Alarm is working properly, please charging Alarm Host for 2 hours & each Tag for 30 minutes before use.
  3. How to install MX-39TR Ring Type Tag. (Video 2)

    4. 3.1.Unscrew the casing of Ring Type Tag and open the cover.
    3.2.Release the security detecting cable from PCB.
    3.3.Make a loop pattern using the cable to secure the device.
    3.4.Reinsert the cable onto PCB.
    3.5.Close back the cover and tighten with screws.
  4. Installation and setting of wireless Alarm. (Video 3)

    5. 4.1.Press MX-39TR Ring Type Tag Power to “ON” & Blue LED Indicator will flash to indicate it is now activated.
    4.2.Press MX-39TP Tag Power to “ON” & Blue LED Indicator will flash.
    4.3.Tear off MX-39TP Tag sticker paper and paste the Tag on the back of the device.
    4.4.Press Alarm Hub power to “ON” & its display panel will show Green LED.
    4.5.Press “Link” button, Alarm Hub will start pairing with the Tags, the Red LED Indicator stays “ON” when Tag is wirelessly connected to Alarm Hub.
    4.6.Press Remote Controller “Fortification” key, alarm in active position, hub blue LED indicator “ON”, and tag’s blue LED indicator into “brighten and dim”light pattern.
  5. We had pairing all units before ship, if unnecessary, please do not press “RESET” button (once press RESET button, back to primitive state), each tag with different CH label from CH1~CH6 (or CH3).
  6. Demonstration of Wireless anti-theft system. (Video 4).

    7. 6.1.Move the device with security Tag out of security distance (2 meters), Tag alarm will beep, and Alarm Hub will also give warning sound.
    6.2.Alarm will automatically de-activate when the device returns within security distance.
    6.3.When the MX-39TP Tag is peeled off from device (or MX-39TR Ring Type cable disconnecting), both Tag and Alarm Hub will beep. The Blue LED on Tag will start flashing.
    6.4.Replace back the Tag on the back of the device, and press remote controller to re-activate the security mode of Tag. Blue LED will return to “brighten and dim” light pattern.
  7. Adjustment of security distance version 1. (Video 5)

    8. 7.1.Demonstrate that the alarm will beep when device is outside of security distance about 2 meters.
    7.2.Shift Alarm Hub 30cm away from the original position, and press remote controller to re-active security mode for Tag.
    7.3.Demonstrate that security distance is adjusted further.
  8. Adjustment security distance version 2. (Video 6)

    9. 8.1.Secure distance is about 3 meters.
    8.2.Shift the Alarm Hub nearer and position it about 30cm from the Tags. Press the remote control to re-activate the security mode of Tags.
    8.3.Demonstrate that the security distance is adjusted shorter.
  9. Adjustment security distance version 3 (if one of Tag security distance farther than others two).
    10. 9.1.During the actual use of the wireless anti-theft device, the alarm distance between the tag and the host may be slightly different due to different angles. When the signal of the tag and the host is deviated, the alarm distance between tag and the host may be caused. Farther, it means that the tag distance between this tag and the host is too far.
    9.2.You can move this tag a little close to the original set distance of 10~20cm (According to the actual use environment to moderate adjustment), press the remote control arming button to Fortification, and wait for 3 seconds to Fortification. After that, you can get back to the position you need to display, and you can solve the problem that the alarm distance is too far.
  10. Adjustment security distance version 4 (if one of Tag security distance near than others two).
    11. 10.1.During the actual use of the wireless anti-theft device, the alarm distance between the tag and the host may be slightly different due to different angles. When the signal of the tag and the host is deviated, the alarm distance between tag and the host may be caused. Farther, it means that the tag distance between this tag and the host is too near.
    10.2.You can move this tag a little far to the original set distance of 10~20cm (According to the actual use environment to moderate adjustment), press the remote control arming button to Fortification, and wait for 3 seconds to Fortification. After that, you can get back to the position you need to display, and you can solve the problem that the alarm distance is too near.
  11. Caution: Host and Tag will not be blocked by metallic material on the display stand & Make sure that the antenna of the host is upright and unobstructed and will not be blocked by metal objects.

Warning / Release
  1. Warning: Once device remove certain distance (~2m ± 20%), buzzer (both Host and Tag) start warning (Beep…) and Tag’s LED Indicator change to flash mode, and Host LED Indicator flash, until device back to safe distance, the buzzer stop beep and LED Indicator back to breathe mode or release alarm by shop member.
  2. Turn OFF buzzer: press remote controller release button to release alarm, other channels still in active position (fortification).
  3. Release Warning: When an alarm occurs, can removed tag back to safe distance from the original display position. The host and Tag will automatically release the alarm sound. At this time, the host and Tag are still in the active state. When the range is exceeded again, the Tag and the host will be trigger again.

Contact switch functions on Tag (MX-39TP)
  1. Warning:
    2. 1.1.Paste tag on the secured device, and press remote controller fortification button, alarm in active position.
    1.2.Any tag is remove from the secured device by external force (or any reason loosed), the contact switch become an open circuit and trigger the buzzer, it’ll come with Beep warning sound, and LED Indicator from “brighten and dim” light pattern mode change to flash mode.
    1.3.The host buzzer warning at same time, warning’s channel LED Indicator from stay ON change to flash mode, the Link LED Indicator also change to flash mode.
  2. Release warning:
    3. 2.1.Please check the cause of the Tag loosed (or disengaged) and re-attach (or change new sticker) on the Tag to the secure device.
    2.2.Press the remote controller fortification button, you can turn off the current alarm sound of the host and tag, and re-enter the fortification state.
    2.3.For safety reason, before press fortification button, all 6 Channels devices put back on original display booth, to avoid excessive distance deviation.

Operation steps after press “RESET” button. (Video 7)
  1. Press Alarm Hub power“ON” button .
  2. Press with pin to RESET host, after hearing beep twice .
  3. Press “Link” button, the host start searching tags .
  4. Host Beep, it’s linked.
  5. Press “Link” button again, host start pairing tag 1.
  6. Host Beep, pair success, Tag ch 01 LED Indicator turn to “brighten and dim” light pattern mode.
  7. Press “Link” button again, host start searching tag 2.
  8. Host Beep, pair success, Tag ch 02 LED Indicator turn to “brighten and dim” light pattern mode.
  9. Press “Link” button again, host start searching tag 3 .
  10. Host Beep, pair success, Tag ch 03 LED Indicator turn to “brighten and dim” light pattern mode.
  11. Armor (Fortification) with remote controller.