Home > Products > Multi-Color
 
Multi-Color - VP-901CM7

Basic Specification
Connectort USB2.0-A male – USB Micro-B male
Over-molding Plug yes
Cable Length 1.2 meter (10c x4 AWG, OD: 3.5mm)
OD 3.5mm
LED(2x3x4) RGB x1, Green x1
Current 1.0 / 1.5 / 2.1 / 2.4 A

Introduction
    User have an original manufacture charger, PLUS, a few different USB AC adapters or Power Bank, but which one does good job by fast charging your Smart-phone or Tablet? iMex Cable can help user understand charging status, and charging progress, all on a single cable.

Product features:
    LED Indicators indicate:
  1. Multi Color LED change automatically.
  2. Charging device condition is met or not.
  3. Battery capacity is degrading or not can be captured by viewing variation of LED indicators.
  4. Fully charge can be found when LED indicators turn“OFF” .
  5. Needless to check the device to know charging status by using iMex Current Detect and Data Sync Cable.

Operation Step:
    • Step 1: Plug USB (Male) connector to Adaptor USB (Female) port.
    • Step 2: Plug Micro USB (Male) to Smartphone Micro USB (Female) port.
    • Step 3: Plug Adaptor to Power Cord, and turn AC power “ON”.
    • Step 4: Start Charge, LED Indicator turn “ON” and change LED color. Input current start from 800mA~2,400mA (depend on Smartphone / Tablet manufacture setting), and charge step down to 300mA.
    • Step 5: Battery capacity reaches 85~90% full, the input current step down to 300mA (depend on Smartphone manufacture setting). “Red” LED starts blinking (Trickle Charge).
    • Step 6: When input current less than 250mA, its mean: Battery Fully Charge, the LED Turn “OFF”.

Multi Color

and